Part ii, Setting the time – Acumen Stopwatch User Manual
Page 28
Advertising
12/24 Hour Time Display Format (blinking)
- Press STR Button
B
or STP/RESET Button
C
to
select 12 or 24 hour time.
- Press MODE/NXT Button
D
to proceed to the next
item. (If you have selected 24 hour time , go to
step 3.)
AM/PM (blinking)
- Press STR Button
B
or STP/RESET Button
C
to
select AM or PM.
- Press MODE/NXT Button
D
to proceed to the next
item.
LAP
LAP
Step 1
Step 2
24
From the Digital time Display, press & hold SET Button
A
for 3
seconds to enter the Set Mode.
Tips:
1
) There are two arrows on the LCD display to indicate the Adjust Buttons.
2) If no button is pressed for 60 seconds, the watch will automatically exit the
Setting Mode.
3) Press & hold SET Button
A
for 3 seconds at any time will exit the Setting
Mode.
Setting the Time
Part II
B
D
C
B
D
C
Advertising