AL Tech MEDIAGATE MG-350HD - Manual (Page 14)

1.2 Format Built-in HDD via USB
If the built-in HDD is not formatted, PC can not detect the hard disk drive. If so, format the hard disk first referring to the following guide. *
If the hard disk drive is al
ready formatted, see “1.3 Copy Data via USB”.
1.2.1 Windows 98SE, ME
1) Install Windows 98 Driver. Find the driver at Windows
98 CD>MediaGate MG-350HD>English>Windows 98
Driver Directory. After finishing installation, Connect MG-35
to PC via USB cable, and plug power cable of MG-350HD.
5) Select “5. Chang current fixed disk drive” and press
[Enter].
6) Type the last Disk number in 0% usage.
7) Select “1. Create DOS partition or Logical DOS Drive”
and press [Enter].
2) Select [Start→Program→Accessories→MS-DOS
Prompt] on Windows.
3) Type “fdisk” command at Command Prompt window
and press [Enter].
4) Type the “Y” at the “Do you wish to enable large disk
support (Y/N)” and press [Enter].
13