AL Tech MEDIAGATE MG-350HD - Manual (Page 45)

4. Use as Network Storage (NDAS)
√ Note
-Recommend to use 100Mbps LAN Card on PC on using wired LAN connection.
-Recommend to use IEEE 802.11g (54Mbps) wireless adapter or Access Point when using wireless LAN connection.
-NDAS function allows to transfer data to HDD in MG-350HD by wired or wireless LAN without setting data sharing works.
-Recommend Pentium III higher and 128MB RAM higher PC (System requirement)
-NDAS PC software works on Windows 2000/XP only. (Available OS)
-Please do not connect LAN Cable and USB Cable at the same time.
-If you do not want to use NDAS function, set NDAS option disable.
-Network environment and PC specification can affect NDAS function.
-Please open ‘My Computer’ and check if Hard Disk in MG-350HD is conceived as Hard Disk Drive of local network. (HDD in MG-350HD looks like
external Hard Disk Drive. C:, D:, E: or F: ) If you cannot see Hard Disk Drive, please turn off MG-350HD and turn on again. (Recognition can take
some time.)
-To remove NDAS function safely, please double click the icon in right bottom tray. (Just like removing external Hard Disk Drive.)
① Select “Network>NDAS Support” in setup screen.
Choose one between “WIRED” and “WIRELESS”. It is not possible
to use both “WIRED” and “WIRELESS” at the same time.
*In case of using “WIRELESS”, use Device ID of wireless LAN MAC
address when connecting to MG-350HD. (In case of using “WIRED”,
use Device ID of wired LAN MAC address)
② Install NDAS PC software on your PC. The software is located at
“MediaGate MG-350HD> English > NDAS software” on setup CD.
44