AL Tech MEDIAGATE MG-350HD - Manual (Page 15)

8) Select “ 1. Create Primary DOS Partition ” and press
[Enter].
9) Wait until finishing verifying the drive integrity.
10) After finishing drive integrity verification, type “Y” at “Do
you wish to use the maximum available size for a Primary
DOS Partition (Y/N)”.
11) Type the capacity or % which you want to use and press
[Enter].
12) Drive integrity verification will start again. After finishing
that, press [ESC] key when the “Primary DOS Partition
created, drive letters changed or added” message displays.
13) Press [ESC] key again. “ Shut down Windows before
restarting” message will be displayed. Press [ESC] key
finally for exiting FDISK.
14