AL Tech MEDIAGATE MG-350HD - Manual (Page 77)

2) Select [FTP Client Save-To Path] and indicate the path.
-> [FTP Client Save-To Path] is the disk path to save or download the files, so you can indicate the HDD inside or a USB drive.
3) After indicating the Disk path, press [Setup] button on the remote control and go to the main menu.
4) At the main menu, press [ ] button on the remote then you can get the second main menu page and ◀
select [FTP] icon.
5) If you press [FTP] icon, then you will get the below pop-up that asks you to select a FTP server.
-> At the first time, there are no server lists, so you need to put a FTP server address manually.
(FTP server lists can be saved even though you power off/on the MG-350HD.)
76