Manual adjustment, Electronic adjustment – AEG F99015VI0P User Manual
Page 13
Water hardness
Water hardness ad-
justment
German degrees
(°dH)
French degrees
(TH°)
mmol/l
Clarke de-
grees
manually
elec-
tronical-
ly
23 - 28
40 - 50
4,0 - 5,0
28 - 35
2
1)
6
19 - 22
33 - 39
3,3 - 3,9
23 - 27
2
1)
5
1)
15 - 18
26 - 32
2,6 - 3,2
18 - 22
1
4
11 - 14
19 - 25
1,9 - 2,5
13 - 17
1
3
4 - 10
7 - 18
0,7 - 1,8
5 - 12
1
2
< 4
< 7
< 0,7
< 5
1
2)
1
2)
1) Factory position.
2) Do not use salt at this level.
You must adjust the water softener manually and electronically.
Manual adjustment
Turn the water hardness dial to the position 1 or 2
(refer to the table).
Electronic adjustment
1. Activate the appliance. Make sure that the appliance is in setting mode.
2. Press and hold touchpad (4) and touchpad (5) at the same time until the indicators of
touchpads (3), (4), (5) and (6) flash.
3. Release touchpad (4) and touchpad (5).
4. Press touchpad (3),
• The indicators of touchpads (4), (5) and (6) go off.
• The indicator of touchpad (3) continues to flash.
• The acoustic signals sound.
• The display shows the setting of the water softener (example:
and you hear five
acoustic signals = level 5).
5. Press touchpad (3) again and again to change the setting.
6. Deactivate the appliance to confirm.
If the water softener is set electronically to the level 1, the salt indicator stays off.
Setting the water softener
13