AEG F99015VI0P - Manual (Page 24)

Problem Possible cause Possible solution
The detergent can be the
cause.
Use a different brand of deter-
gent.
The dishes are wet. The washing programme was
without a drying phase or with
a decreased drying phase.
For better drying results, keep
the door ajar for some minutes.
The dishes are wet and matt. The rinse aid dispenser is emp-
ty.
Fill the rinse aid dispenser with
rinse aid.
The multitab function is on
(this function automatically
deactivates the rinse aid dis-
penser).
Activate the rinse aid dispenser.
Activating the rinse aid dispenser
1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold touchpad (4) and touchpad (5) at the same time until the indicators of
touchpads (3), (4), (5) and (6) flash.
4. Release touchpad (4) and touchpad (5).
5. Press touchpad (4).
• The indicators of touchpads (3), (5) and (6) go off .
• The indicator of touchpad (4) continues to flash.
• The display shows the setting of the rinse aid dispenser.
The rinse aid dispenser is off.
The rinse aid dispenser is on.
6. Press touchpad (4) to change the setting.
7. Deactivate the appliance to confirm.
TECHNICAL DATA
Dimensions Width 596 mm
Height 818 - 898 mm
Depth 550 mm
Water supply pressure Minimum 0.5 bar (0.05 MPa)
Maximum 8 bar (0.8 MPa)
Water supply 1) Cold water or hot water maximum 60 °C
Capacity Place settings 12
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
24 Technical data