AEG F99015VI0P User Manual

Page 23

Advertising
background image

Malfunction

Possible cause

Possible solution

The delay start is set.

• Cancel the delay start.
• When the countdown is

completed, the washing pro-

gramme starts automatical-

ly.

After the check, activate the appliance. The programme continues from the point of inter-

ruption.

If the malfunction occurs again, contact the service centre.

If the display shows other alarm codes, contact the service centre.

The necessary information for the service centre is on the rating plate.

Record this information:
– Model (MOD.) ........................................................
– Product number (PNC) ..........................................
– Serial number (S.N.) ..............................................

The washing results and drying results are not satisfactory

Problem

Possible cause

Possible solution

The dishes are not clean.

The washing programme was

not applicable for the type of

load and soil.

Make sure that the washing

programme is applicable for

the type of load and soil.

You did not put the items cor-

rectly in the baskets, water did

not touch all surfaces.

Put the items correctly in the

baskets.

The spray arms could not turn

freely. Incorrect position of the

items in the baskets.

Make sure that an incorrect po-

sition of the items do not cause

the blockage of the spray arms.

The filters are dirty or not as-

sembled and installed correctly.

Make sure that the filters are

clean and correctly assembled

and installed.

The quantity of detergent was

not sufficient or missing.

Make sure that the quantity of

detergent is sufficient.

Limescale particles on the

dishes.

The salt container is empty.

Fill the salt container with dish-

washer salt.

Incorrect level of the water

softener adjustment.

Adjust the water softener with

the correct level.

The salt container cap is not

closed correctly.

Make sure that the salt con-

tainer cap is closed correctly.

There are streaks, whitish

stains, or a bluish layer on

glasses and dishes.

The rinse aid quantity is too

high.

Decrease the rinse aid quantity.

Dry water drop stains on

glasses and dishes.

The rinse aid quantity is too

low.

Increase the rinse aid quantity.

What to do if…

23

Advertising