AEG L75270FL - Manual (Page 15)

This is the maximum level for the quantity of liquid additives.
Always obey the instructions that you find on the packaging of the deter-
gent products.
SETTING AND STARTING A PROGRAMME
SETTING THE PROGRAMME
(KNOB 1 )
Turn the programme selector dial to the
required programme.
The programme dial determines the type
of washing cycle (e.g. water level, drum
movement, number of rinses) and the
washing temperature according to the
type of laundry.
The pilot light of button 8 starts blinking.
The programme dial can be turned either
clockwise or anticlockwise.
= Reset programme / switching OFF
of the machine
If you turn the programme dial to
another programme when the ap-
pliance is working, the yellow pilot
light of button 8 blinks 3 times.
The display shows the message
Err to indicate a wrong selection.
The machine will not perform the
new set programme.
SETTING THE TEMPERATURE
(BUTTON 2)
When setting a programme, the
appliance automatically proposes
the default temperature provided
for that programme.
Press the button 2 repeatedly to increase
or decrease the temperature, if you want
your laundry to be washed at a different
temperature.
The wash with cold water is indicated with
.
For the maximum and the mini-
mum available wash water tem-
perature, see «Washing pro-
grammes».
SETTING THE SPIN SPEED
(BUTTON 3)
When you set the programme, the appli-
ance automatically proposes the maxi-
mum spin speed allowed by that pro-
gramme.
Press this button repeatedly to change
the spin speed. The relevant light will
light up.
RINSE HOLD : the water of the last rinse is
not emptied out to prevent the fabrics
from creasing. When the programme has
finished the display shows a blinking .
The DOOR pilot light goes on.
The pilot light of button 8 is off. The door
is blocked to indicate that the water must
be emptied out.
To empty the water out please read
chapter «At the end of the pro-
gramme».
SETTING THE STAIN OPTION
(BUTTON 4)
Set this option to treat heavily soiled or
stained laundry with stain remover
The appliance extends the main wash
phase and intensifies the stain action
phase. The relevant light illuminates.
This option is not available with a
temperature lower than 40°C.
If you wish to perform a programme with
the stain option, pour stain remover into
compartment
.
SETTING THE EXTRA RINSE
OPTION (BUTTON 5)
This appliance is designed for saving wa-
ter.
However, for people with a very delicate
skin (allergic to detergents) it may be nec-
essary to rinse the laundry using an extra
quantity of water (extra rinse).
ENGLISH
15