A b c, Indicator pilot lights, Acoustic signals – AEG L75270FL User Manual

Page 9: Child safety lock

Advertising
background image

End of programme
When the programme has finished, the display shows a blinking
zero .
The DOOR light B, the WASHING light A and the light of button 8
go out.
The door can be opened.

Incorrect option selection
If you set an option which is not compatible with the wash pro-
gramme, the display shows the message Err for some seconds.
The yellow pilot light of button 8 light starts blinking.

Delay Start
When you press the relevant button to set the delay (20 hours
max), it appears for some seconds, then the display shows the du-
ration of the set programme.
The delay time value decreases by one unit every hour. When only
1 hour remains, the time decreases every minute.

Delay Start symbol
This symbol comes on when you set the delay time.

Child safety lock
This symbol comes on when you activate the child lock function.

INDICATOR PILOT LIGHTS

A
B
C

After you have pressed the button 8, the
WASHING light (A) comes on.
The machine is operating.
The DOOR light (B) indicates when the
door can be opened:
• light on: the door cannot be opened
• light blinking: the door is opening in

some minutes

• light off: the door can be opened
When the appliance is performing addi-
tional rinses The EXTRA RINSE light (C)
comes on.

ACOUSTIC SIGNALS

The machine is provided with an acoustic
device, which sounds in the following ca-
ses:
• at the end of the cycle
• in the event of operating problems.
By pressing the 3 and 4 buttons simulta-
neously for some seconds, the acoustic
signal is deactivated (except for the
events of operating problems). By press-
ing these two buttons again, the acoustic
signal is reactivated.

CHILD SAFETY LOCK

This device permits you to leave the ap-
pliance unsupervised and not to worry
that children might be injured by or cause
damage to the appliance.
This function remains able also when the
washing machine is not working.
There are two different ways to set this
option:
• Before pressing button 8: it will be im-

possible to start the machine.

• after pressing button 8: it will be impos-

sible to change any other programme
or option.

To enable or disable this option press si-
multaneously for about 6 seconds buttons

ENGLISH

9

Advertising
This manual is related to the following products: