AEG Rear Camera System RV 3.5 User Manual

Page 24

Advertising
background image

14

12

13

15

16

17

First engage the hand brake and be sure the
vehicle is not in gear. On vehicles with auto-
matic transmission put the car into “P“ for
parking lock. Turn the ignition to II, do not start
the engine!

Plug in the monitor by plugging the monitor
cable into the 12 V vehicle outlet. Press the
button to power on the monitor. The sym-
bol ( ) on the button must light up blue.

Now put the vehicle into reverse. The trans-
mitted camera image will now be displayed
on the monitor.

Use the buttons ( + ) and ( - ) to
increase, decrease or advance the following
menu items:
Brightness: adjusts the monitor brightness
Contrast: adjusts the monitor contrast
Color: adjusts the monitor's color intensity
Direction: adjusts the monitor display. Adjust
image upside down and left / right
Guidelines: can be activated or deactivated
Language: set language to English / German
Exit: leave menu mode

In "Exit" mode press a ( + ) or( - )
button to leave the menu mode.

Push the On / Off key so the symbol ( )
on the key lights up blue.

Press the (M) button to access menu mode
The display will now show the menu settings for
approx. 7 seconds. The respective adjustment
mode will be displayed in yellow font.

Each time the button (M) is pressed again the
menu will advance to the next level of settings.

Guidelines On / Off

Direction

Colour

Contrast

Brightness

Language English / German

Exit

14

12

13

15
16

17

12

13

14

15

14

15

12

3

2

Unscrew the retaining screw.

Remove the contact cap, spring and the
1 A (Ampere) fuse.

Assemble all parts and the new 1 A fuse in the
order shown and tighten the retaining screw.

Image 15

Contact cap

Spring

12 V plug
Vehicle connector

Fuse 1 A (Ampere)

Retaining screw

4.6 Replacing fuses

4.5 Testing the backup camera system

Image 14

4.4 Monitor menu settings

Power on the monitor before using the backup
camera and off after use.

On / Off button, lights up blue when
the monitor is powered on
Menu button for selecting the respective
adjustment mode
Forward / increase button
Back / decrease button
Guides (distance guides) on the display
to assist with reversing
Display image

Image 13

4.3 Monitor operation

24

97152_R

ckfahrkamera_RV3.5_ Manual _07_03_12_Print

Mittwoch, 7. M

rz 2012 11:42:17

Advertising