AEG FP5200 - Manual (Page 23)

23
D
GR
NL
F
GB
Getting started
1. Before using the food processor for
the first time, wash all parts except for
the motor housing.
GB
3. Put the ingredients in the bowl.
(Do not exceed the maximum filling
volume: liquid 400 ml, solid 1000 ml.)
Close the cover (A) and insert the
feed tower pusher into the feed tower
(B) and lock into position. Insert the
plug in the main socket.
5. Start the food processor by turning
the speed selector to required
speed. For using the PULSE function
turn the Speed selector to position
”PULSE”. Use speed setting 1-2 for
normal work, the food processor can
be used up to 3 minutes without
stopping. For heavy work, (bread
dough) the appliance should not be
switched on more than 90 seconds
without stopping.
4. Further ingredients can be added
during operation through the feed
tower. Close the feed tower
immediately after, to avoid splashing.
Use the feed tower pusher exclusively
to compress the cutting items!
6. Switch off the food processor by
turning the speed selector to the
“0” position. After use, turn the
cover counter-clockwise and remove.
Only remove the cover when the tool
has stopped completly. Remove the
tool, turn the bowl counter-clockwise
and remove. Remove the spindle.
2. Place the food processor on a flat
surface. Place the spindle on spigot
in centre of all-purpose bowl. Place
the all-purpose bowl into position
and lock into the motor housing.
When the arrow is aligned with the
“Locked” indicator, the bowl is locked
in position. Depending on purpose
place the selected tool on the
spindle.
A
B