Olympus DS7000 - Manual (Page 4)

4
EN
C
S
D
A
DE
ES
F
R
NL
P
L
RU
S
V
f Caution:
• Unplug the AC adapter or power
cord from the docking station
and AC outlet when not using for
extended periods of time. If this
precaution is not followed and the
docking station is damaged then
fire may occur.
AC adapter
f Danger:
• Be sure to use the AC adapter with
the proper voltage (AC 100 - 240
V). Using it with other voltage
levels may cause fire, explosion,
overheating, electric shock or injury.
• For safety, be sure to unplug
the AC adapter from the outlet
before performing maintenance
or cleaning. Also, never plug in or
disconnect the power plug with a
wet hand. This may cause electric
shock or injury.
f Warning:
• Do not attempt to disassemble,
repair or modify the AC adapter in
any way.
• Keep foreign objects including
water, metal, or flammable
substances from getting inside the
product.
• Do not moisten the AC adapter or
touch it with a wet hand.
• Do not use the AC adapter in the
vicinity of flammable gas (including
gasoline, benzine and lacquer
thinner).
• Always stop recording before
connecting or disconnecting the
power supply plug.
• When the AC adapter is not in use,
disconnect the power supply plug
from the power outlet.
• Use only power supply of the
correct voltage, as indicated on the
adapter.
In case:
• ... the internal parts of the AC
adapter are exposed because it
has been dropped or otherwise
damaged:
• ... the AC adapter is dropped in
water, or if water, metal flammable
substances or other foreign objects
get inside it:
• ... you notice anything unusual
when using the AC adapter such as
abnormal noise, heat, smoke, or a
burning odor:
1 do not touch any of the exposed
parts;
2 immediately disconnect the
power supply plug from the
power outlet, and;
3 call your dealer or local Olympus
representative for servicing.
Continued use of the AC adapter
under these circumstances could
result in electric shock, fire or
injury.
f Caution:
• Do not use the AC adapter if the
power plug is damaged or the
plug is not completely connected
to the outlet. This may cause fire,
overheating, electric shock, short
circuit or damage.
• Unplug the AC Adapter from
AC outlet when not using. If this
precaution is not followed, fire,
overheating or electric shock may
occur.
• Make sure to hold the plug when
removing the power plug from
the outlet. Do not bend the cord
excessively or put heavy objects on
it. This may cause fire, overheating,
electric shock or damage.
LCD monitor
• The LCD used for the monitor
is made with high-precision
technology. However, black spots
or bright spots of light may appear
on the LCD Monitor. Due to its
characteristics or the angle at which
you are viewing the monitor,
the spot may not be uniform in
color and brightness. This is not a
malfunction.
Memory Card
f Warning:
• Do not touch the card contacts. This
may damage the card.
• Do not place the card in locations
with static electricity.
• Store the card in a location that is
out of the reach of children. In case
of accidental ingestion, consult a
physician immediately.
Getting started
Identification of parts
6
7
$
1
2
3
4
!
8
9
5
@
0
) (*
& ^ %
-
#
1 SD card slot
2 Built-in microphone
3 NEW button
4 Slide ( REC / STOP / PLAY / REV )
switch
5 ERASE button
6 Record indicator light
7 Display (LCD panel)
8 + (Volume) button
9 Fast Forward ( 9 ) button
0 OK/MENU button
! Programmable smart
( F1 , F2 , F3 ) buttons
@ Rewind ( 0 ) button
# – (Volume) button
$ Built-in speaker
% Battery cover
^ Battery cover release
button