Bushnell WEATHERFX 960900C - Manual (Page 10)

10
for a complete table of the forecast icons for the Weather FXi software
screen and the Receiver display, along with the weather conditions
they indicate.
E) FAVORITE LOCATION INDICATOR
All the displayed weather data is for the location currently selected on
the Receiver. The numbers 1-5 shown here correspond to the location
boxes (from left to right) across the top of the screen in the Weather FXi
application. “Favorite #1” is your home or current location, same as the
first box on the left in the Weather FXi software screen. Use the + or -
buttons on the left side of the Receiver to change the Receiver’s display
to show the weather forecast for the other cities (you will see the names
of locations 2-5). Note: if you select an “empty” location on the Receiver,
which does not have a location set for it in the corresponding box in the
software (the box is blank in the Weather FXi application), no data will be
displayed on the Receiver.
F) HI / LO TEMPERATURE FORECAST (Today)
Indicates the forecasted high and low temperatures for the current
day.
G) CURRENT TEMPERATURE WITH RealFeel®
The current temperature at the selected location, and the Exclusive
AccuWeather RealFeel Temperature®, an index that evaluates everything
that affects how warm or cold a person feels, measuring the combined
effects of temperature, wind, humidity, sunshine intensity, cloudiness,
precipitation and elevation. Press UNITS on the back of the Receiver
until you see “Temperature Unit Setting” and use the + / - buttons to
select o F or o C (this affects all displayed temperature data).
H) WEATHER MESSAGE
Updated text messages regarding upcoming weather conditions,
including any storm alerts or other warnings.
I) RELATIVE HUMIDITY FORECAST
The relative humidity forecast for the current day.
J) CHANCE OF PRECIPITATION
The chance of precipitation is displayed (as a percentage).
K) WIND SPEED AND DIRECTION
The average wind speed & direction forecast. Press UNITS on the back of
the Receiver until you see “Wind Unit Setting” and use the + / - buttons
to select your preferred wind units (km/h, mph, m/s or knots).
RECEIVER DISPLAY GUIDE