Bushnell WEATHERFX 960900C - Manual (Page 3)

3
1) Install the Software
Insert the CD, click the “Weather FXi Setup Wizard” button and follow
the onscreen directions to install the Weather FXi software on your PC
(Windows 2000 or later, with an “always on” internet connection).
2) Connect the Transmitter
Connect the USB Transmitter to your PC’s USB port.
3) Launch the Weather FXi application, Set Locations and Units
Double click the “Weather FXI” icon on your desktop. When the application
opens, move the cursor into the far left box at the top, then click “Edit
Location” when it appears. Set your current location by selecting from the
four drop down lists, then click “Save”. Follow the same process to setup
any or all of the remaining four location boxes. Next, click the “Settings”
button and set your preferences for temperature, wind speed units
and time format, then click “Save”. In the main Weather FXi application
window, you can click in any of the other “location boxes” you set up to
see the forecast for that city.
4) Setup the Receiver Unit (Remote Display)
Insert 4xAA batteries into the Receiver, or connect its supplied AC
adapter. The Receiver’s display initializes and reads “Searching for PC”
(press the
SEARCH button on the back of the unit if this does not appear).
Attach the easel stand to the Receiver and place it near the PC so you can
see its display while you complete the setup.
5) Transmit Weather Data from the PC Application to the Receiver
Click “Send to Receiver” on the Weather FXi program window. The red
LED on the USB Transmitter will glow, then blink while data is transferred
from the PC software to the Receiver. The Receiver will indicate “
PC
FOUND-PLS WAIT 5 MINS ” When the Transmitter’s light stops flashing,
check to see that the Receiver’s display matches the weather data shown
on the PC screen. Make sure the location box selected on the Weather
FXi application and the “Favorite” location # on the Receiver display are
the same (use the +/- buttons on the Receiver to change locations). Also
be sure the units for temperature, wind speed, etc. are set the same
(click “Settings” on the software screen, press UNITS on back of the Receiver
and change them using the +/- buttons if necessary-press UNITS again to
change other displayed units). Keep the Weather FXi application running
in the background and keep your PC powered on and connected to
the internet, so the Receiver can provide you with the latest up-to-date
forecast information.
Quick Start Guide
Problems? Questions?
Please read the following detailed Instructions and Troubleshooting.