Bushnell WEATHERFX 960900C User Manual
Page 9
9
RECEIVER DISPLAY GUIDE
A) RF (RADIO FREQUENCY) RECEPTION STATUS
This icon shows the connection status between the Receiver unit and
the USB Transmitter. There are three basic status indications:
The Receiver is successfully synchronized to the USB
Transmitter and receiving weather data from it periodically.
A flashing icon indicates that the Receiver is searching for
the RF signal from the USB Transmitter.
No vertical bars indicates that the RF signal from the USB
Transmitter is not being received or is too weak.
B) NETWORK TIME (Auto-synchronized clock)
The clock on the main unit is synchronized to the Internet network
time automatically and is adjusted for optimal accuracy. Press UNITS
on the back of the Receiver until you see “Hour Format Setting” and
use the
+ / - buttons to select 12 or 24 Hr time format.
NOTE: If your PC is not connected to the internet for a long period of time,
the clock display may not be accurate. Once you reconnect to the internet,
exit and then relaunch the Weather FXi software, then click “Send to
Receiver”.
C) ALARM ON INDICATOR
Icon appears confirming the alarm has been set by pressing ALARM.
D) WEATHER FORECAST SYMBOLS (ICONS)
Please see the “Forecast Icons Reference” at the back of this manual
A
B C
D
F
G
E
H
I
J
K
L M
N