Olympus mrobe 100 - Manual (Page 12)

Re
ad t
h
is
fi
rs
t
Safety Precautions
EN-12
• Do not apply excessive pressure to the liquid crystal display. This may cause smears, or damage the liquid
crystal display. Should the liquid crystal display break, avoid getting any of the liquid crystal in your mouth.
If it contacts your skin or clothing, wash it off immediately with soap and water.
• Lines, like strips of light, may appear at the top or bottom of the liquid crystal display. This is not a
malfunction.
• In general, the lower the temperature, the longer it takes the liquid crystal display to turn on. Keep this
product warm when using in a cold region. Performance of the liquid crystal display may deteriorate in low
temperatures, but will be restored when this product is returned to normal temperatures.
• The latest high precision technology has gone into the making of the liquid crystal display
of this product, but there are some pixels which are permanently lit or which do not light at
all. Also, depending on the angle at which the screen is viewed, the colors and brightness
may appear uneven. This is due to the structure of the liquid crystal display and is not a
malfunction.
Precautions regarding the liquid crystal display
Inro 0_E.book Page 12 Wednesday, November 17, 2004 3:51 PM