Troubleshooting, En-50 – Olympus mrobe 100 User Manual

Page 50

Advertising
background image

Addit

io

n

al inf

o

rma

tion

Troubleshooting

EN-50

Troubleshooting

Before sending the product for repair, refer to the following checklist to resolve the problem. If the problem

persists, contact your nearest Olympus service center.

In addition, be sure to back up the data in your m:robe before sending this product for repair or service. Writing

to the hard disk or deleting data etc., may be necessary during the repair or service. Due to copyright

restrictions, we cannot copy stored data for repair or service. Restoring the data is not possible. We also

recommend backing up your data often, by synchronization, to prevent data loss problems.

Problem

Cause

Resolution

Page

The power cannot be

turned on.

The HOLD function is set

to ON.

Slide back the HOLD

switch to release the

HOLD function.

gpage 28

The player turns off

automatically.

OFF TIMER is set.

The POWER is turned off

automatically after the

setting time of OFF

TIMER has elapsed. Set to

“OFF” to disable the OFF

TIMER setting.

g page 46

The Auto Off function is

activated.

3 minutes after playback

stops, the power turns off

automatically.

Press the POWER to turn

the device on.

g page 27

Nothing is on the display.

The battery is empty.

Charge the battery with the

supplied AC adapter.

gpage 18

The display is not clear.

The battery is empty.

Charge the battery with the

supplied AC adapter.

gpage 18

The LCD brightness setting

is too low.

Adjust settings of the LCD

CONTRAST.

gpage 46

The display and the LED

lights are turned off.

The backlight is set to turn

off.

Set the desired time or

change “BACKLIGHT” to

“ON”.

gpage 46

The display does not turn

on.

The HOLD function is set

to ON.

Slide back the HOLD

switch to release the

HOLD function.

gpage 28

Inro 0_E.book Page 50 Wednesday, November 17, 2004 3:51 PM

Advertising