Olympus DS-2500 - Manual (Page 17)

Turning on/off the power
When the recorder is not being used, turn the power
off to reduce battery consumption to a minimum.
Even if the power is turned off, existing data, mode
settings, and clock settings will be maintained.
Turning on the power
While the recorder is turned off, slide the
POWER
/HOLD switch to the direction of the
arrow.
• The display will turn on, and after [System Check]
appears, the power will be turned on. The resume
function will bring the recorder back to the stop
position in memory before power was turned off.
Power Save Setting
You can set the time to enter Power Save mode
from among [5 minutes], [10 minutes], [30
minutes], [1 hour], and [Off].
To exit power save, press any button.
The [Power Save] setting can be changed from
the Menu. For more details, refer to “Menu
list” (
☞ P.39) and “Learning to use the menu”
(
☞ P.41).
Turning off the power
Slide the POWER/HOLD switch to the
direction of the arrow, and hold it for 0.5
seconds or longer.
• The display shuts off and the power will be turned
off. The resume function remembers the stop
position before the power is turned off.
Power supply
Power Save Mode (Power Save)
When the recorder is ON but not in use for 10
minutes, by default, it will switch to power save
mode automatically. To reactivate the recorder again,
operate any button or the slide switch.
BACK EXIT
Power Save
5 minutes
30 minutes
1 hour
Off
10 minutes
1
EN
17
Po
we
r s
u
p
p
ly