Olympus DS-2500 - Manual (Page 34)

Erasing
Partially erasing a file
1
Playback the file you would like to
partially erase.
2
Press the ERASE button at the point to
start erasing.
• While playback continues, [Erase start] will
appear on the display.
• If you press the F2 ( ) button, playback will
skip (F.Skip) to the end of the file and then
stop. That will be set automatically as the
ending point of the partial erase.
• If you press the F1 ( ) button, playback will
skip back (B. Skip) and restart from the partial
erase starting point.
Playback will continue until the end of the
file or until the partial erase ending point is
confirmed.
You can erase a selected file in part.
3
Press the ERASE button at the point to
end erasing.
• The erase starting point (time) set in step 2
and the ending point (time) set in this step will
alternate on the display for 8 seconds.
2
EN
34
134
/ 134
DS2500
QP DICT
45
M
02
s
0 1 H 55 M 25 s
Ni
INSERT SPEED INDEX
45
M
02
s
01
H
55
M
23
s
Erase start
EXIT
134
/ 134
EXIT
DS2500
QP DICT
05
M
01
s
Start point
Ni
0 1 H 55 M 25 s
134
/ 134
EXIT
DS2500
QP DICT
45
M
32
s
End point
Ni
0 1
H
15
M
25
s
PLAY/OK
2
3
Eras
in
g