Belkin F1UP002 - Manual (Page 36)

36
Print Server
List The Print Server List will show all the Print Servers
within the network. You can find the Print Server’s
information including “All-In-One Print Server
Name”, “MAC ID”, “IP Address”, and the device
that is connected to the Print Server.
All-In-One
Print Server/
Multifunction-
Printer (MFP)
Information When you click on the Print Server in the Print-
Server list, you will see the “All-In-One Print Server
Description” and the “Idle Timeout” setting for that
Print Server.
All-In-One
Print Server
Description This description helps users identify the location
and the name of the Print Server.
Idle Timeout From here, each user can know his/her idle-
timeout setting. To avoid occupying the printer
overtime, each user can set the “Idle Timeout”
from “Option\General Setting”. It is used to
disconnect the connection after the printer is idle
for a specified period of time. By default, there is
no timeout setting.
When you click on the printer in the Print-Server
list, you will see information including “Status”,
“Computer Name”, and “Contact Information”.
Status This displays the status of the printer including
“Connected”, “Idle”, and “Busy”. When the
status is “Connected”, it indicates that you are
connecting the MFP. When the status is “Idle”, it
indicates that the printer is not being used. When
the status is “Busy”, it indicates that another user
is using the printer to scan, print, etc.
All-In-One Print Manager
1
2
3
4
5
6
7
8
9
10
11
se
ct
io
n