Belkin F1UP002 - Manual (Page 44)

44
General Setting
Start Control
Manager on
Windows startup
Executes the Belkin All-In-One Print
Manager when Windows starts every time.
By default, it is enabled.
Minimized when start
Control Manager
Minimizes the Belkin All-In-One Print
Manager to an icon in the system tray
when you start the Belkin All-In-One Print
Manager. By default, it is disabled.
Refresh status every
xx seconds. (5~300)
Sets up the refresh interval for device-
status update. By default, it is disabled.
Your Contract
Information
Enter your contact information here. When
you connect to the printer, your contact
information will be displayed in the right
side of the program for other users to
contact you.
Search for All-In-One Print Server
If the Print Server is not in the network as your computer, you can
enter the IP address of the Print Server to do the remote search. The
Print Server in the Remote MFP Server List will be added to the Print
Server List for you to configure.
All-In-One Print Manager
1
2
3
4
5
6
7
8
9
10
11
se
ct
io
n