Belkin F1UP002 - Manual (Page 58)

58
Infrastructure
Mode:
Print Server Manager
1
2
3
4
5
6
7
8
9
10
11
se
ct
io
n
In the Infrastructure mode, you have to allow the Print Server to
associate with an access point. You can choose to let the Print
Server scan for an available access point automatically, or you can
manually assign the SSID of the access point you want to use.
The table will list the available access points near the Print Server.
Select an access point from the list and click “Next”. If you cannot
find the access point that you want to use, click “Scan” to allow the
Print Server to scan again.
If you select to
allow the Print
Server to scan
for an available
access point, the
following window
will pop up.