Pioneer PDP-428XD - Manual (Page 24)

Watching TV 06
24
En
Note
• The multiscreen function cannot display images from the same
input source at the same time. If you make such an attempt, a
warning message appears.
• The multiscreen function cannot display images from
combinations of two external input sources (INPUT 1 to
INPUT 5, PC). It can display images from the following
combinations of input sources.
- Analogue TV (or digital TV) and external source
(INPUT 1 to INPUT 5, PC)
• When you press HOME MENU, the single-screen mode is
restored and the corresponding menu is displayed.
• When in the 2-screen mode, images displayed on the right
screen may look less fine, depending on the images.
• While in the 2-screen or picture-in-picture mode, the analogue
favourite channel list is not available. While in the 2-screen or
picture-in-picture mode, the digital channel list is not available.
• With headphones connected, you can listen to audio coming
from the sub screen when in the 2-screen or picture-in-picture
mode. For more information, see page 36.
Freezing images
Use the following procedure to capture and freeze one frame from
a moving image that you are watching.
• Before operating with the remote control unit, make sure to select
the TV mode using its SELECT button. See Controlling other
equipment using the supplied remote control unit on page 68.
Important
• Displaying a static image for a long period of time, or for shorter
periods of time everyday, may result in image retention.
1 Press d.
A still image appears on the right screen while a moving image is
shown on the left screen.
2 Press d again to cancel the function.
Note
• You cannot freeze the picture when using the 2-screen or
picture-in-picture mode.
• When this function is not available, a warning message
appears.
DVD HDD DISC
NAVI
HDMI
CONTROL
Normal image Still image
PDP-508XD.book Page 24 Thursday, April 26, 2007 2:34 PM