Advanced operations for internet radio, Saving internet radio stations, Retrieving saved internet radio stations – Pioneer XW-NAC3-R User Manual

Page 27: Setting up the network, Playback with home media gallery inputs 05

Advertising
background image

Playback with HOME MEDIA GALLERY inputs

05

27

En

English

Français

Español

Advanced operations for
Internet radio

Saving Internet radio stations

This unit can remember the Internet radio

stations that you often listen to in three classes

(A to C) with up to ten stations in each class to

make the total of 30 stations at its maximum

capacity.
Before proceeding with the following steps,

check whether you have followed Steps 1 to 3

at Playback with Home Media Gallery on

page 23.

1

Tune into the Internet radio station.

Tune into the desired Internet radio station by

following Steps 1 to 3 at Playback with Home

Media Gallery on page 23.

2

Press T.EDIT to switch to the station

saving mode.

3

Press CLASS.

Select the desired class from A to C.

4

Use

/ to select the number, and then

press ENTER.
Select the desired number from 0 to 9.

Retrieving saved Internet radio
stations

You need to save Internet radio stations first

before retrieving them. If there are no Internet

radio stations currently being saved, see

Saving Internet radio stations above and save at

least one Internet radio station before

proceeding with the following steps.

1

Press CLASS.

Each time you press CLASS, the class switches

to A to C in turn.

2

Use

/ to select the station number.

’No Preset’

appears when you select an

Internet radio station currently not being

saved.

Setting up the network

In case the router connected to the LAN

terminal on this unit is a broadband router

(with the built-in DHCP server function), simply

turn on the DHCP server function, and you will

not need to set up the network manually. You

must set up the network as described below

only when you have connected this unit to a

server without the DHCP server function.

1

Note

1 In case you make changes to the network configuration without the DHCP server function, make the corresponding changes

to the network settings of this unit. Before you set up the network, consult with your ISP or the network manager for the

required settings. It is advisory that you also refer to the operation manual supplied with your network component.

XW-NAC3_SYXJ.book 27 ページ 2010年3月25日 木曜日 午後7時21分

Advertising
This manual is related to the following products: