08 using the timer, Setting the clock, Changing the clock’s display mode – Pioneer XW-NAC3-R User Manual
Page 36: Using the timer, Using the timer 08, Chapter 8
Using the timer
08
36
En
Chapter 8:
Using the timer
Setting the clock
Setting the clock allows you to use the timer.
1
1
With the power turned ON, press
.
The current time and day are displayed.
• If the clock is not set, the Timer Setup screen
will be displayed. Proceed with Step 3.
2
Press
again.
The Timer Setup screen is displayed.
3
Use
/ to select ’Clock Adjust’, then
press ENTER.
The Clock Adjust screen is displayed.
4
Use
/ to set the day, then press
ENTER.
5
Use
/ to set the hour, then press
ENTER.
6
Use
/ to set the minute, then press
ENTER.
When the setting is completed, the newly set
value displays for 2 seconds.
Changing the clock’s display mode
You can choose to display the clock in 12-hour
mode or 24-hour mode.
• Default setting: 12H (12-hour mode)
1
With the power turned ON, press
.
The current time and day are displayed.
2
Press
again.
The Timer Setup screen is displayed.
3
Use
/ to select ’Hour Display’, then
press ENTER.
The Hour Display screen is displayed.
4
Use
/ to select ’12H’ or ’24H’, then
press ENTER.
When the setting is completed, the newly set
value flashes for 2 seconds.
Note
1 You’ll need to set the clock again if you unplug the unit (or in case of a power failure).
XW-NAC3_SYXJ.book 36 ページ ２０１０年３月２５日 木曜日 午後７時２１分