Pioneer PDP-435FDE - Manual (Page 16)

06 Preparation
16
En
Installing the Media Receiver vertically
You can use the supplied stand to install the Media Receiver
vertically.
1. Insert the stand into the side of the Media
Receiver.
2. Secure the stand with the supplied screws.
Screws
3. Remove the shock absorbing pads.
Keep the shock absorbing pads and screws. They are re-
quired when you place the Media Receiver in the horizontal
position.
4. Plug the screw holes using the supplied caps.
• When you have installed the Media Receiver verti-
cally, be sure to use the supplied stand. If you place
the unit directly on the floor, the cooling vents will be
blocked, resulting in mechanical failure.
Remove the separation sheet.
Screw hole cap
Align with the
hole and attach.
Right side
Shock absorbing pad