Pioneer PDP-435FDE - Manual (Page 20)

06 Preparation
20
En
Antenna cable - commercially available
If your outdoor antenna uses a 75-ohm coaxial cable with a standard DIN45325
plug (IEC169-2), plug it into the antenna terminal at the rear of the Media Receiver.
Basic connections
Connecting to an antenna
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used
for a coaxial cable.
Europe, except U.K.
and Eire
Europe, except U.K.
and Eire
U.K. and Eire
U.K. and Eire
SERVICE ONLY
i / o link.A SELECT
INPUT 2 3
INPUT 2
INPUT 1
INPUT 3
INPUT 2
Y PB PR COMPONENT VIDEO
MONITOR OUTPUT
R-AUDIO-L S- VIDEO VIDEO
BLACK
WHITE SYSTEM CABLE
AC IN
INPUT 3 HDMI INPUT 3
SERVICE ONLY
i / o link.A SELECT
INPUT 2 3
INPUT 2
INPUT 1
INPUT 3
INPUT 2
Y PB PR COMPONENT VIDEO
MONITOR OUTPUT
R-AUDIO-L S- VIDEO VIDEO
BLACK
WHITE SYSTEM CABLE
AC IN
INPUT 3 HDMI INPUT 3
Connecting the power cord
Plasma Display (bottom view)
Media Receiver (rear view)
• Always turn off the main power of the Plasma Display and Media Receiver when connecting the power cords.
• Disconnect the power cord from the power outlet, Plasma Display and Media Receiver when the system is not going to be
used for a long period of time.
• Connect the 75-ohm coaxial cable (commercially available) to ANT
(antenna input) terminal.