Pioneer PDP-435FDE - Manual (Page 29)

09 Basic Adjustment Settings
English
29
En
Clock
Clock Set Programme 1 ABCDE
02/07/2004 FRI 0:00
7 Press HOME MENU to exit the menu.
• If the system fails to set the date and time through the
selected TV channel, the “Time & Date” entry screen
appears. Set the correct, current time.
Setting Child Lock
Child Lock inhibits selected TV channels from being tuned
and watched.
1 Repeat steps 1 to 4 provided for Using Manual Adjust.
After selecting a channel for label entry (using
Programme Entry), perform the following steps.
2 Select “Child Lock” ( / ).
3
Select “Block” ( / ).
Manual Adjust
Search
System
Programme Entry
Colour System
Store
Label
Child Lock
Decoder
42. 75MHz
B/G
Auto
Off
ABCDE
1
Yes
Block
• The selection is switched between “View” and
“Block”.
4 Press HOME MENU to exit the menu.
Selecting a decoder input terminal
If you have connected a decoder, select a decoder input
terminal (INPUT1).
1 Repeat steps 1 to 4 provided for Using Manual Adjust.
After selecting a channel for label entry (using
Programme Entry), do the followings steps.
2
Select “Decoder” ( / ).
3
Select “INPUT 1” ( / ).
Label
Child Lock
Decoder
ABCDE
Block
INPUT1
4 Press HOME MENU to exit the menu.
• With “Off” (factory default) selected, you cannot watch any
images from the decoder.
Sorting preset TV channels
Use the following procedure to change the sequence of the
preset TV programmes.
1 Press HOME MENU.
2 Select “Setup” ( / then ENTER).
3 Select “Analogue TV Setup” ( / then ENTER).
• The password entry screen appears. Enter your 4-digit
password using buttons 0 – 9.
4 Select “Sort” ( / then ENTER).
• The sort screen appears.
Sort 1/4
56789 01
01234 02
55555 03
01234 04
56789 05
01234 06
56789 07
01234 08
01234 09
10
11
12
13
14
15
16
17
01234 18
19
20
21
22
23
24
25
56789
01234
56789
01234
56789
01234
56789
56789
01234
55555
01234
56789
01234
56789
01234
5
Select a channel to be shifted ( / , / then ENTER).
6
Select a new location ( / , / then ENTER).
• Sorting is executed.
7 Press HOME MENU to exit the menu.
• To change a page on the Sort screen in step 6, select a/b
on the screen with / to select a page, and then press
ENTER.
• The above procedure transfers and sets only the shifted
channel information to recording equipment such as a VCR
or DVD recorder.
Clock setting
Use the following procedure to set the time correctly.
1 Press HOME MENU.
2 Select “Setup” ( / then ENTER).
3 Select “Analogue TV Setup” ( / then ENTER).
• The password entry screen appears. Enter your 4-digit
password using buttons 0 – 9.
4 Select “Clock” ( / then ENTER).
5 Select “Clock Set Programme” ( / ).
6 Select a TV channel to be used for auto clock setting
(
/ ).