Entering a password, 10 useful adjustment settings, Picture aspect ratio – Pioneer PDP-435FDE User Manual
Page 37: Sleep timer, Using a password
10
Useful Adjustment Settings
English
37
En
Picture aspect ratio
With the WSS function switched to “On”, select the display
format for 4:3 aspect ratio signal input.
1
Press HOME MENU.
2
Select “Option” ( / then ENTER).
3
Select “4:3 Mode” ( / then ENTER).
4
Select “4:3” or “WIDE” ( / then ENTER).
Changing the brightness at both sides
of the screen (Side Mask)
With the 4:3/FULL 14:9/CINEMA 14:9 screen size selected for
the AV mode, you can change the brightness of the grey side
masks that appear at both sides of the screen.
1
Press HOME MENU.
2
Select “Option” ( / then ENTER).
3
Select “Side Mask” ( / then ENTER).
4
Select the desired parameter ( / then ENTER).
4:3 Mode
4:3
WIDE
Item
Description
4:3
Keeps the 4:3 aspect ratio and presents
side masks.
WIDE
Wide image without side masks.
(factory default)
4:3
WIDE
5
Press HOME MENU to exit the menu.
Side Mask
Fixed
Auto
Item
Description
Fixed
Always sets the same brightness for the
(factory default) grey side masks.
Auto
Adjusts the brightness of the grey side
masks according to the brightness of
images.
5
Press HOME MENU to exit the menu.
Sleep Timer
When the selected time elapses, the Sleep Timer automati-
cally places the system into the standby mode.
1
Press HOME MENU.
2
Select “Sleep Timer” ( / then ENTER).
3
Select the desired time ( / then ENTER).
• You can select from among “Off” (cancel),
“30 min”, “60 min”, “90 min”, and “120 min”.
4
Press HOME MENU to exit the menu.
• Five minutes before the selected time elapses, the remain-
ing time appears every minute.
• To check the remaining time, perform steps 1 and 2.
Using a password
This system provides the Child Lock function for preventing
children from watching inappropriate programmes. You need
to enter a password when watching programmes with “Block”
specified. Before the system is shipped, “1234” is preset as
the factory-default password. You can however, change the
password as you want.
When using the Home menu you select “Auto Installation”,
“Analogue TV Setup”, or “Password”, a screen prompting
password entry appears to prevent others from changing the
programme settings at their choices.
Entering a password
In a case where you select a channel blocked with Child Lock
or password entry is requested when attempting to open the
menu, enter a password correctly.
1
Enter a correct 4-digit password using buttons
0 – 9.
Please Input Your Password.
• If you fail password entry three times, “Invalid password.”
appears, and the menu is closed. In order to display the
password entry screen again to unlock the password,
select the blocked channel or open the menu again.