Pioneer X-HM71-S - Manual (Page 14)

4 4
14
iPod/iPhone/iPad playback
Merely by connecting your iPod/iPhone/iPad to this receiver,
you can enjoy high-quality sound from your iPod/iPhone/iPad.
This receiver can also be connected to a television set, letting
you view images from your iPod/iPhone.
Playback and volume level setting for iPod/iPhone music and
images can be performed from this receiver or the iPod/
iPhone itself.
Confirming what iPod/iPhone/iPad models are
supported
The iPod/iPhone/iPad playable on this receiver are shown
below.
Note
• This receiver is compatible with the audio of the iPod nano
(audio only for the iPod nano 3/4/5/6/7G), iPod touch (1/2/3/
4/5G), iPhone, iPhone 3G, iPhone 3GS, iPhone 4, iPhone
4S, iPhone 5, iPad, iPad 2, iPad 3, iPad 4 and iPad mini.
However, some of the functions may be restricted for some
models. The receiver is not compatible with the iPod
shuffle.
• This receiver has been developed and tested for the
software version of iPod/iPhone/iPad indicated on the
website of Pioneer (http://pioneer.jp/homeav/support/ios/
eu/).
• Installing software versions other than indicated on the
website of Pioneer to your iPod/iPhone/iPad may result in
incompatibility with this receiver.
• iPod, iPhone and iPad are licensed for reproduction of
noncopyrighted materials or materials the user is legally
permitted to reproduce.
• Features such as the equalizer of iPod/iPhone/iPad cannot
be controlled using this receiver, and we recommend
switching the equalizer off before connecting.
1
Select “Settings” from the top menu.
You can confirm your software version by operating your
iPod/iPhone/iPad. When using iPod touch, iPhone or
iPad, select “General” after selecting “Settings”.
2
Select “About”.
The software version will be displayed.
Tip
• When using an iPod/iPhone/iPad not supported by this
receiver, use a commercially available cable to connect the
iPod/iPhone/iPad to the AUDIO IN jack of this receiver.
Connecting your iPod/iPhone/iPad
CAUTION
• Do not use an adaptor that converts into a Lightning
connector on the unit's iPod/iPhone connector to connect
an iPod/iPhone/iPad. This may lead to malfunction/
damage to the connector.
Please connect these Lightning connector devices to the
USB port on the front of the unit.
iPhone 5, iPad (4th generation), iPad mini, iPod touch (5th
generation), iPod nano (7th generation)
Connecting iPod/iPhone to the docking station
CAUTION
• If you have the Universal dock adapter provided with your
iPod/iPhone or a commercially adapter designed to
support iPod/iPhone, use it when you connect iPod/iPhone
to this receiver.
• Unplug all accessories from the iPod or iPhone before
inserting it into the dock.
• Connect iPad to the USB/iPod/iPhone/iPad terminal.
1
Open the dock cover by pulling up.
2
If you have the Universal dock adapter, attach it to iPod/
iPhone connector port on this receiver.
An iPod/iPhone universal dock adapter is not supplied
with this receiver.
When attaching the Universal dock adapter, be sure to
orient the front-back directions of the Universal dock
adapter correctly. Insert the adapter into the iPod/iPhone
dock, and press into position. When attaching the
adapter, be careful not to strike the connectors.
3
Connect your iPod/iPhone.
When iPod/iPhone is connected to this receiver, iPod/
iPhone is charged.
To remove the Universal dock adapter
iPhone/iPad/iPod Audio Control
iPhone  
iPhone 3G/iPhone 3GS  
iPhone 4/iPhone 4S  
iPhone 5  
iPad/iPad 2  
iPad (3/4G)  
iPad mini  
iPod nano (3/4/5/6/7G)  
iPod touch (1/2/3/4/5G)  
iPod/iPhone iPod/iPhone
(bottom)
Dock connector
iPod/iPhone
connector
Insert the tip of a screwdriver ("–" type, small)
into the Universal dock adapter hole as shown
and lift upward to remove.