Pioneer X-HM71-S - Manual (Page 18)

6 6
18
Disc playback
This receiver can play back a standard CD, CD-R/RW in the
CD format and CD-R/RW with MP3 or WMA files, but cannot
record on them. Some audio CD-R and CD-RW discs may not
be playable due to the state of the disc or the device that was
used for recording.
MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3. MP3 is a type of audio code which is
processed by significant compression from the original audio
source with very little loss in sound quality.
• This system supports MPEG-1/2/2.5 Audio Layer 3
(Sampling rates: 8 kHz to 48 kHz; Bit rates: 32 kbps to 320
kbps).
• During VBR file playback, time counter in the display may
differ from its actual playback time.
WMA:
WMA files are Advanced System Format files that include
audio files which are compressed with Windows Media Audio
codec. WMA is developed by Microsoft as an audio format file
for Windows Media Player.
• This receiver supports WMA (Sampling rates: 32 kHz/44.1
kHz/48 kHz; Bit rates: 5 kbps to 320 kbps).
Playing discs
1
Press the STANDBY/ON button to turn the power on.
2
Press CD on the remote control or INPUT button
repeatedly on the receiver to select CD function.
3
Press  to open the disc tray.
4
Place the disc on the disc tray, label side up.
5
Press  to close the disc tray.
6
Press / () to start playback. After the last track is
played, the receiver will stop automatically.
CAUTION
• Do not place two discs in one disc tray.
• Do not play discs of special shapes (heart, octagon, etc). It
may cause malfunctions.
• Do not push the disc tray whilst it is moving.
• If the power fails whilst the tray is open, wait until the power
is restored.
• Be sure to place 8 cm disc in the middle of the disc tray.
Note
• Due to the structure of the disc information, it takes longer
to read an MP3/WMA disc than a normal CD
(approximately 20 to 90 seconds).
• Rewritable multi-session discs with unfinished writing, can
still be played.
• If TV or radio interference occurs during CD operation,
move the receiver away from the TV or radio.
Advanced CD or MP3/WMA disc playback
Direct track search
By using the numeric buttons, the desired tracks on the
current disc can be played.
Use the numeric buttons on the remote control to
select the desired track whilst playing the selected
disc.
• The numeric buttons allow you to select up to number 9.
• When selecting number 100 or higher, use the “+100”
button.
• When selecting number 10 or higher, use the “+10” button.
A. For example, to choose 13
1
Press the “+10” button.
2
Press the “3” button.
STANDBY/ON
INPUT
PHONES AUDIO IN USB iPod/ iPhone/iPa d
NET STANDBY/ POWER
CHARGE TIMER
VOLUME
TUNER EDIT
REPEAT
SHUFFLE
PLAY MODE
FOLDER
CLEAR
1 2 3
4 5 6
7 8 9
0 10 100
ENTER
CD
 T13
Selected track number