Pioneer X-HM71-S - Manual (Page 6)

6
1 1
Controls and displays
Front panel
1 Remote sensor
Receives the signals from the remote control (page 5).
2 Network Standby and power indicator
When turning on the receiver, this indicator flashes slowly for
thirty seconds or more. After thirty seconds or more, this
indicator lights. This indicator also lights in the Network
Standby mode. In the Network Standby mode, during AirPlay
or DMR, the receiver automatically turns on (page 7).
3 Display
See Display below.
4 iPod or iPhone docking station
Connect iPod/iPhone (page 14).
5 Charge indicator
Lights when iPod/iPhone connected to the docking station is
charged (page 14).
6 Timer indicator
Lights when the timer is set (page 11).
7 Volume control
Use to adjust the listening volume (page 13).
8 STANDBY/ON button
Switches the receiver between standby and on (page 11).
9 INPUT button
Select the input source (page 12).
10 Headphone socket
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers
(page 12).
11 AUDIO IN jack
Use to connect an auxiliary component using a stereo mini-
jack cable (page 12).
12 USB terminal
Use to connect your USB mass storage device or iPod/
iPhone/iPad as an audio source (page 10, 22).
13 Disc tray
Place the disc, label side up (page 18).
14 Playback control buttons
Select the desired track or folder to be played back. Use  to
stop the playback. Use / to stop playback or resume
playback from the pause point (page 18).
15 Disc Tray Open/Close button
Use to open or close the disc tray (page 18).
Display
1 Input source
2 Mute
Displayed during the mute operation (page 13).
3 Sleep timer
When the sleep timer is set, the remaining time until power off
is displayed (page 11).
4 Network connection status
When the receiver is connected to the wired network,
this indicator lights (page 10).
When the receiver that is connected to the LAN cable
is not connected to the network, this indicator lights.
When the LAN cable is not connected to this receiver, this
indicator does not light (page 10).
When the receiver is connected to the wireless
network, this indicator lights. Depending on the strength
of wireless signal, the icon changes in five steps (page 10).
When the receiver is not connected to the wireless
network, this indicator lights (page 10).
5 Name of file/track/artist/album/station, etc.
6 Artwork
Displayed when the currently playing file includes an album
jacket image, etc.
7 Repeat and Shuffle
Repeat all files.
Repeat a file.
Shuffle
8 Play status
Displays the play status. The play status differs depending on
the input source.
STANDBY/ON
INPUT
PHONES AUDIO IN USB iPod/iPhone/iPad
NET STANDBY/ POWER CHARGE TIMER
VOLUME
1 3
15
9
7
8
14 12 10
2 5 6
11 13
4
iPod
Song 1
Artist
Album
44:38 - 44:02
7
7
1 3 2 4
5
8
6
7
1