Changing or deleting an area to avoid – Pioneer AVIC700D User Manual
Page 75
74
■Changing or deleting an Area to Avoid
You can subsequently change/rename/delete the Area to Avoid.
1
Select “Settings” in the Main menu, then select “Route Guidance” and “Areas to
Avoid”. Click the OK button.
The list of Areas to Avoid appears.
2
Select an area you want to change or delete, and click the OK button.
➲
When “Display Areas to Avoid” is set to On, if you perform the above operation, the
message confirming whether to recalculate the current route is displayed. Select
“Yes”, click the OK button, and proceed to the next step.
3
Select the desired operation and click the OK button.
On this display, you can select the following options:
Rename : Changing a name. After entering a new name, select “OK” and click the OK
button; the Route Guidance menu appears.
Change : A specified area can be changed. For the next steps, see Step 2 onwards in the
“Registering an Area to Avoid” above. (If the route is set, the map of your sur-
roundings appears once the route has been recalculated.)
Delete :
Delete the selected Area to Avoid. (If the route is set, the map of your sur-
roundings appears once the route has been recalculated.)
CRB1875A_Eng.book Page 74 Thursday, March 27, 2003 1:22 PM