Pioneer AVIC700D - Manual (Page 87)

86
■Changing background picture stored on a disc (AV Background
only)
1 Select “Settings”, “Background Picture Setting” from the Main menu, and click the
OK button.
Background Picture Setting menu is displayed. The picture selected at each screen is indi-
cated on the right side of “AV Background” and “Navigation Background” items.
2 Select “AV Background” and click the OK button.
The list of the pictures available is displayed. If you want to install a picture directly from
PC card, refer to Step 4 onwards in “Selecting a picture stored in PC card”.
3 Select a picture you want for the background, and click the OK button.
The message whether or not to set the picture being selected appears.
4 Click the OK button.
Selected picture is set.
➲
Only JPEG format (“.jpg”) pictures can be used as a background picture.
➲
You can only use standard characters (alphabets of both cases: A-Z, a-z) and numbers (0-
9) for the file name of a background picture (international (accented) characters cannot be
used).
➲
Up to maximum 2048 ҂1536 pixels picture can be used. We cannot guarantee a proper
operation for a picture bigger than this size.
➲
Progressive format JPEG pictures cannot be used.
➲
When changing a picture starts, do not cut off the vehicle engine until the message inform-
ing the completion of changing a picture is indicated. Otherwise a picture file may be
destroyed.
➲
If a map disc is not set to the Navigation System, you cannot change the background pic-
ture.
➲
When the Navigation System is reset, or the language setting is changed, background pic-
ture may be changed to the original picture. (There is also a possibility that the system will
revert to the original picture for some other reason). If this happens, set the background
picture again.
CRB1875A_Eng.book Page 86 Thursday, March 27, 2003 1:22 PM