Playback 05 – Pioneer DVR-3100-S User Manual
Page 40
Playback
05
40
En
1
Press PLAY MODE to display the Play Mode menu
screen.
• You can also access the Play Mode menu from the
Home Menu (press
HOME MENU
).
2
Use the
/ / /
(cursor buttons) and ENTER
to navigate.
• To exit the Play Mode menu, press
HOME MENU
or
PLAY MODE
.
Search Mode
The Search Mode feature lets you start playback from a
specified point in a disc by time or by title/chapter/folder/
track number.
1
Select ‘Search Mode’ from the Play Mode menu.
2
Select one of the search options.
3
Use the number buttons to enter a title/chapter/
folder/track number or the search time (in hours,
minutes & seconds).
Title/Chapter/Folder/Track Search:
For example, for track 6,
press
6
. Alternatively, you can use the
/
(cursor up/
down) buttons.
Time Search (DVD and Video CD only):
For example, for 45
minutes into the disc, press
4, 5, 0, 0
. For 1 hour and 15
minutes and 20 seconds into the disc, press
1, 1, 5, 2, 0
.
• If
Frame Search
is
On
(see
Frame Search
on page 87),
then you need to add a frame number to the end of
the time search. For example 22 minutes, 10 seconds
and 5 frames, press
2, 2, 1, 0, 0, 5
.
• PAL video contains 25 frames per second, numbered
0 through 24.
• When using frame search with film material
(recorded at 24 frames/second), accurate frame
search may not be possible. This is because of the
difference between the recorded frame rate and the
playback frame rate.
4
Press ENTER.
• If you searched by frame, the recorder will pause on
the selected frame.
Tip
• You can often select what you want to watch on a
DVD disc from the disc menu. Press
MENU
or
TOP
MENU
to display the disc menu.
Note
• When using time search, playback may occasionally
start slightly before or after the time you input.
• Time search doesn’t work with Super VCDs.
A-B Repeat
The A-B Repeat function allows you to specify two points
(A and B) within a track or title that form a loop which is
played over and over.
Important
• You can’t use A-B Repeat with WMA/MP3 or Super
VCD discs.
1
During playback, select ‘A-B Repeat’ from the
Play Mode menu.
2
Highlight ‘A (Loop Start)’.
3
At the point you want the loop to start, press
ENTER.
4
Highlight ‘B (Loop End)’.
5
At the point you want the loop to end, press
ENTER.
Playback immediately jumps back to the start point and
plays the loop round and round.
• When playing a DVD, the start and end points of the
loop must be in the same title.
6
To resume normal playback, select ‘Off’ from the
A-B Repeat menu.
• You can also press
CLEAR
to cancel A-B Repeat play
if no menu OSD (such as the Disc Navigator) is
displayed.
Play Mode
Search Mode
A-B Repeat
Repeat
Program
Time Search
Title Search
Chapter Search
ALL
Search Mode
A-B Repeat
Repeat
Program
Time Search
Title Search
Chapter Search
Input Time
0.01.00
Play Mode
DVD
CD
Video CD
Search Mode
A-B Repeat
Repeat
Program
A (Loop Start)
B (Loop End)
Off
Play Mode
DVR-03_UK.book 40 ページ 2003年7月28日 月曜日 午後6時30分