Pioneer DVR-3100-S - Manual (Page 85)

The Initial Setup menu 12
85
En
When set to On , the recorder displays subtitles
according to the Subtitle Language and Auto
Language settings. Set to Off to switch subtitles off
altogether (although you may find that some discs
override this setting). Set to
Assist Subtitle to have the
recorder display the extra assistive subtitles recorded on
to some DVD discs.
Selecting ‘Other’ languages
1 Select ‘Other’ from the language list.
This option appears in the settings for DVD Menu
Language, Audio Language, and Subtitle Language.
2 Select the language you want.
• Select by language name: Use the / (cursor left/
right) buttons to change the language.
• Select by code number: Press (cursor down) then
use the number buttons to enter the 4-digit language
code.
See Language code list on page 97 for a list of available
languages and corresponding codes.
3 Press ENTER to confirm and exit the screen.
Recording settings
Manual Recording
• Default setting: Off
On the default setting there are four different recording
time/picture quality settings,
FINE , SP , LP and EP . If you
want to create a custom setting, switch on Manual
Recording and select one of the 32 manual settings.
When recording, you can select your Manual Recording
setting using the
REC MODE button.
1 Select ‘On (go to setup)’ to display the manual
recording setting screen.
2 Use the / (cursor left/right) buttons to
change the manual recording level.
• You can also use the and buttons to cycle
between levels MN1 , MN9 , MN21 and MN32 .
• To preview the recording quality, press (cursor
down) and select Preview . To return to the level
adjust screen, press ENTER .
3 Press ENTER to set the manual recording level
and return to the menu screen.
Note
• The preset picture quality settings correspond to the
following manual settings: FINE : MN32 , SP : MN21 ,
LP : MN9 , EP : MN1 .
• See page Manual recording modes on page 96 for
detailed information on the manual recording levels.
Optimized Rec
• Default setting: Off
On the default setting, if a timer program (standard, easy
or VIDEO Plus+ programming system) is set but there
isn’t enough space on the disc at the recording quality
set, the recording will start, but it will be cut off when the
disc is full. Set
Optimized Rec to On to have the recorder
automatically adjust the recording quality to fit the
available disc space.
Note
• You may notice a reduction in picture quality if the
recorder has to fit a lot of extra material into the
remaining time available on the disc.
• If, even on recording level MN 1 , there is insufficient
space available on the disc, the recording is made at
level
MN 1 but recording will stop once the disc is
full.
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback OSD Language
Audio Language
Subtitle Language
Auto Language
DVD Menu Language
Subtitle Display
DVD Menu Language
DVD Menu Language
English
0 5 1 4
Language
Number
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Manual Recording
Optimized Rec
Navi Mark
Auto Chapter (Video)
DVD-RW Auto Init. On (go to setup)
Off
Initial Setup
Pr 5
EP LP SP FINE
Preview
DVD Remain 2h00m
MN 9 (4h00m/DVD) 2.60Mbps
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback On
Off Manual Recording
Optimized Rec
Navi Mark
Auto Chapter (Video)
DVD-RW Auto Init.
Initial Setup
DVR-03_UK.book 85 ページ ２００３年７月２８日 月曜日 午後６時３０分