Setting the picture quality for disc playback, The video/audio adjust menu 11 – Pioneer DVR-3100-S User Manual
Page 73
The Video/Audio Adjust menu
11
73
En
4
Use the
/
(cursor left/right) buttons to adjust
the currently selected picture quality setting.
5
When you have all the settings as you want
them, press HOME MENU to exit.
You can now use the preset for any other input or the
built-in TV tuner.
Tip
• To see more of the picture as you adjust different
settings, press
ENTER
after selecting the setting you
want to adjust.
Note
• When the DV input is selected, only
VNR
and
Detail
settings can be adjusted.
• When
White AGC
is
On
, the
White Level
setting
can’t be adjusted.
• The
3-D Y/C
and
Black Setup
settings apply only to
NTSC video input.
Setting the picture quality for disc
playback
This setting determines how the picture will look when
playing discs.
Choosing a preset
1
With a disc playing (or paused), press HOME
MENU and select ‘Video/Audio Adjust’.
2
Select ‘Video Adjust’
3
Use the
/
(cursor left/right) buttons to
change the setting.
There are 6 presets available:
•
TV(CRT)
– suitable for standard cathode-ray tube TVs
•
PDP
– suitable for plasma display screens
•
Professional
– suitable for professional monitors
•
Memory1
– user preset 1
•
Memory2
– user preset 2
•
Memory3
– user preset 3
You can press
DISPLAY
to see the individual settings for
the current preset (
TV(CRT)
,
PDP
or
Professional
).
4
Press ENTER to select the preset.
Creating your own set
There are three user presets in which you can save your
own set of picture quality settings for disc playback.
1
Follow
Choosing a preset
above and select one of
the user presets (Memory 1, 2 or 3).
2
Move the cursor down and select ‘Detailed
Settings’.
3
Select the picture quality setting you want to
adjust.
You can adjust the following settings:
•
YNR
– Adjusts the amount of noise reduction (NR)
applied to the Y (brightness) component.
•
CNR
– Adjusts the amount of noise reduction (NR)
applied to the C (colour) component.
•
QNR
– Adjusts the amount of noise reduction (NR)
applied to the block noise.
•
Detail
– Adjusts how sharp edges appear.
•
White Level
– Adjusts the intensity of white.
•
Black Level
– Adjusts the intensity of black.
•
Black Setup
– Corrects the standard reference black
level (NTSC video only).
•
Hue
– Adjusts overall balance between red and
green.
•
Chroma Level
– Adjusts how rich the colours
appear.
4
Use the
/
(cursor left/right) buttons to adjust
the currently selected picture quality setting.
5
When you have all the settings as you want
them, press HOME MENU to exit.
Tip
• To see more of the picture as you adjust different
settings, press
ENTER
after selecting the setting you
want to adjust.
TV(CRT)
Detailed Settings
Pr 5
Memory1
Detailed Settings
Pr 5
Pr 5
Off
Max
Off
Max
Off
Max
YNR
CNR
QNR
Off
Max
Detail
Min
Max
Min
Max
White Level
Black Level
Black Setup
Memory1
0 IRE
DVR-03_UK.book 73 ページ ２００３年７月２８日 月曜日 午後６時３０分