Pioneer DEH-P7100BT - Manual (Page 38)

5 Press MULTI-CONTROL to make a call.
6 To end the call, press PHONE/ /
BT MENU.
Introduction to advanced
operations
1 Press and hold PHONE/ /BT MENU to
select TELEPHONE as the source.
2 Press MULTI-CONTROL to display the
main menu.
3 Use MULTI-CONTROL to select
FUNCTION.
The function menu is displayed.
Turn to change the menu option. Press to se-
lect.
4 Turn MULTI-CONTROL to select the
function.
PH BTransfer (phone book transfer)
—
Auto answer (automatic answer setting) —
Far end Volume (Adjust the intended party
’s
listening volume)
—Ring tone (ring tone se-
lect)
—Number dial (call by entering number)
—SCO Private mode (private mode)
Notes
! To return to the playback display, press
BAND/ESC/CANCEL.
! If you do not operate functions other than
PH BTransfer, and Number dial within about
30 seconds, the display automatically returns
to the ordinary display.
! You can operate SCO Private mode only
while talking on the phone.
! If Bluetooth telephone is not connected to this
unit, Number dial cannot be operated.
Transferring entries to the
phone book
Phone books in your cellular phone can be
transferred to this unit by using your cellular
phone.
! 1 000 entries for each user (max. 5 devices)
can be stored in the phone book. Each in-
dependent entry can hold five phone num-
bers and genres.
1 Display the function menu.
Refer to Introduction to advanced operations
on this page.
2 Use MULTI-CONTROL to select
PH BTransfer.
3 Press MULTI-CONTROL to enter the
phone book transfer standby mode.
4 Use the cellular phone to perform
phone book transfer.
Perform phone book transfer using the cellu-
lar phone. For detailed instructions, refer to
the instruction manual that came with your
cellular phone.
When phone book transfer is completed,
Data transferred is displayed.
# The display indicates how many entries have
been transferred and the total number to be
transferred.
Setting automatic answering
1 Display the function menu.
Refer to Introduction to advanced operations
on this page.
2 Use MULTI-CONTROL to select
Auto answer.
3 Press MULTI-CONTROL to turn auto-
matic answering on.
# To turn automatic answering function off,
press
MULTI-CONTROL again.
Adjusting the intended party
’s
listening volume
To maintain the good speech quality, this unit
can adjust the intended party
’s listening vo-
lume. If the volume is not enough for intended
party, adjust this function.
Using Bluetooth wireless technology
En
38
Section
08