Pioneer DEH-P7100BT - Manual (Page 43)

Introduction of audio
adjustments
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option. Press to se-
lect.
The audio menu is displayed.
3 Turn MULTI-CONTROL to select the
audio function.
Turn
MULTI-CONTROL to switch between the
audio functions in the following order.
FAD BAL (balance adjustment)
—Powerful
(graphic equalizer adjustment)
—50Hz (7-band
graphic equalizer adjustment)
—Loudness
(loudness)
—Sub W1 (subwoofer on/off set-
ting)
—Sub W2 (subwoofer setting)—Bass
(bass boost)
—HPF (high pass filter)—SLA
(source level adjustment)
—ASL (automatic
sound levelizer)
—Guidance VOL (voice gui-
dance volume adjustment)
# You can select the Sub W2 only when sub-
woofer output is turned on in
Sub W1.
# When selecting FM as the source, you cannot
switch to
SLA.
# If Language select (language selection) is set
to
РУССКИЙ, Guidance VOL cannot be ad-
justed.
# If TELEPHONE is selected as a source, only
FAD BAL (balance adjustment) and
Guidance VOL (guidance volume) can be oper-
ated.
# To return to the display of each source, press
BAND/ESC/CANCEL.
# If you do not operate functions except for
50Hz within about 30 seconds, the display is
automatically returned to the ordinary display.
Using balance adjustment
You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.
1 Display the audio menu.
Refer to Introduction of audio adjustments on
this page.
2 Use MULTI-CONTROL to select FAD BAL
in the audio function menu.
3 Push MULTI-CONTROL up or down to
adjust front/rear speaker balance.
Each time
MULTI-CONTROL is pushed up or
down, the front/rear speaker balance moves
towards the front or rear.
FAD F15 to FAD R15 is displayed as the front/
rear speaker balance moves from front to rear.
# FAD 0 is the proper setting when only two
speakers are used.
# When the rear output setting is Sub W, you
cannot adjust front/rear speaker balance. Refer to
Setting the rear output and subwoofer output on
page 50.
4 Push MULTI-CONTROL left or right to
adjust left/right speaker balance.
Each time
MULTI-CONTROL is pushed left or
right, the left/right speaker balance moves to-
wards the left or right.
BAL L15 to BAL R15 is displayed as the left/
right speaker balance moves from left to
right.
Using the equalizer
The equalizer lets you adjust the equalization
to match the car
’s interior acoustic character-
istics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display Equalizer curve
Powerful Powerful
Natural Natural
Vocal Vocal
Audio Adjustments
En
43
Section
10
Audio
Adjustments