Initial settings adjusting initial settings, Selecting the language, Setting the date – Pioneer DEH-P7100BT User Manual
Page 48: Setting the clock, Adjusting initial settings, Initial settings
Adjusting initial settings
1
Press SRC/OFF and hold until the unit
turns off.
2
Press MULTI-CONTROL and hold until
the initial setting menu appears in the dis-
play.
3
Turn MULTI-CONTROL to select one of
the initial settings.
Language select (language selection)
—
Calendar (calendar)
—Clock (clock)—
Off clock (off clock)
—FM step (FM tuning
step)
—Auto PI (auto PI seek)—Warning tone
(warning tone)
—AUX1 (auxiliary input 1)—
AUX2 (auxiliary input 2)
—List guidance
(voice guidance setting)
—Dimmer (dimmer)
—Rear SP (rear output and subwoofer control-
ler)
—Demo mode (feature demo)—
Ever scroll (ever scroll)
—BT AUDIO (BT audio
setting)
—BT Memory Clear (clearing Blue-
tooth memory)
—Software update (software
update)
# To cancel initial settings, press
BAND/ESC/CANCEL.
Selecting the language
For your convenience, this unit equips multi-
ple language guidance. You can select the lan-
guage best suited to your first language.
1
Display the initial setting menu.
Refer to Adjusting initial settings on this page.
2
Use MULTI-CONTROL to select
Language select in the initial setting menu.
3
Push MULTI-CONTROL left or right to
select the language.
English
—Français—Italiano—Español—
Deutsch
—Nederlands—РУССКИЙ
4
Press MULTI-CONTROL to determine
the selection.
# Display guidance and voice guidance are set
to the same language simultaneously.
# If the language is set to РУССКИЙ, voice gui-
dance and TTS (text to speech) cannot be
performed.
Setting the date
The calendar display adjusted in this mode ap-
pears when the telephone source is selected
or sources and the feature demo are off.
1
Display the initial setting menu.
Refer to Adjusting initial settings on this page.
2
Use MULTI-CONTROL to select Calendar
in the initial setting menu.
Calendar appears in the display.
3
Push MULTI-CONTROL left or right to
select the segment of the calendar display
you wish to set.
Day
—Month—Year
As you select segments of the calendar dis-
play the segment selected will blink.
4
Push MULTI-CONTROL up or down to
set the date.
Pushing
MULTI-CONTROL up will increase
the selected day, month or year. Pushing
MULTI-CONTROL down will decrease the se-
lected day, month or year.
Setting the clock
Use these instructions to set the clock.
1
Display the initial setting menu.
Refer to Adjusting initial settings on this page.
2
Use MULTI-CONTROL to select Clock in
the initial setting menu.
3
Push MULTI-CONTROL left or right to
select the segment of the clock display you
wish to set.
Hour
—Minute
As you select segments of the clock display,
the selected segment blinks.
Initial Settings
En
48
Section
11