Pioneer DEH-P7100BT - Manual (Page 55)

Playing songs on iPod
Basic operation
You can use this unit to control an interface
adapter for iPod (e.g. CD-IB100
N), which is sold
separately.
% Fast forward or reverse
Push and hold
MULTI-CONTROL left or right.
% Select a track
Push
MULTI-CONTROL left or right.
Notes
! Read the precautions for iPod in the following
section. Refer to page 65.
! If an error message is displayed, refer to Error
messages on page 62.
! When the ignition switch is set to ACC or ON,
the iPod
’s battery is charged while the iPod is
connected to this unit.
! While the iPod is connected to this unit, the
iPod cannot be turned on or off.
! Before connecting the dock connector of this
unit to the iPod, disconnect the headphones
from the iPod.
! The iPod is turned off about two minutes after
the ignition switch is set to OFF.
Displaying text information on
iPod
The operation is the same as that of the iPod
connected to USB interface of this unit. (Refer
to Displaying text information on iPod on page
26.)
Browsing for a song
The operation is the same as that of the iPod
connected to USB interface of this unit. (Refer
to Browsing for a song on page 25.)
However, the selectable categories are slightly
different. Selectable categories are
Playlists (playlists)
—Artists (artists)—
Albums (albums)
—Songs (songs)—Genres
(genres)
Introduction to advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
3 Turn MULTI-CONTROL to select the
function.
Repeat (repeat play)
—Shuffle (shuffle)—
Pause (pause)
Function and operation
Repeat and Pause operations are basically
the same as that of the built-in CD player.
Function name Operation
Repeat
Refer to Selecting a repeat play
range on page 21.
However, the repeat play ranges
you can select are different from
that of the built-in CD player. The
repeat play ranges of the iPod are:
! One – Repeat the current song
! All – Repeat all songs in the
selected list
Pause
Refer to Pausing playback on page
21.
Notes
! To return to the ordinary display, press
BAND/ESC/CANCEL.
! If you do not operate functions within about
30 seconds, the display automatically returns
to the ordinary display.
Available accessories
En
55
Section
13
A
vailable
accessories