Pioneer AVIC-HD3-II - Manual (Page 164)

Returning the Navigation
System to the Default or
Factory Settings
You can return settings or recorded contents
to the default or factory settings. There are
four methods to clear user data, and the situa-
tions and the cleared contents are different for
each method. For the contents that are cleared
in each method, see the list presented later.
p The map data and the system data are not
cleared from the hard disk drive by any
clearing method.
Method 1: RESET button
Pressing RESET button clears almost all set-
tings of the audio function.
The system becomes the same state when the
battery of the vehicle is removed or the yellow
lead of the navigation system is disconnected.
Method 2: [ Restore Factory Settings]
Clears some items in [ Map] menu and in [Set-
tings] menu.
= For details, refer to Restoring the Default Set-
ting on page 80
Method 3: [
Reset] on start-up
Clears the setting values stored in the hard
disk drive.
= For details, refer to If system errors fre-
quently occur on page 167
Method 4: [
Clear user information from
hard disk] on start-up
Clears all user data (including Music Library)
stored in the hard disk drive.
= For details, refer to Completely returning the
navigation system to the initial state on page
167
Appendix
Engb
164
Appendix