Pioneer AVIC-HD3-II - Manual (Page 96)

p When you recall a preset station, the tuner
may update the preset station with a new
frequency from the station
’s AF list. (This is
only available when using presets on the
FM1 or FM2 bands.) No preset number ap-
pears on the display if the RDS data for the
station received differs from that for the ori-
ginally stored station.
p Sound may be temporarily interrupted by
another programme during an AF fre-
quency search.
p AF can be turned on or off independently
for each FM band.
Using PI Seek
If the navigation system fails to find a suitable
alternative frequency, or if you are listening to
a broadcast and the reception becomes weak,
the navigation system will automatically
search for a different station with the same
programming. During the search,
“PI Seek” is
displayed and the output for audio source is
muted. The muting is discontinued after com-
pletion of the PI Seek, whether or not a differ-
ent station is found.
Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, as
when travelling long distances, the navigation
system can be set to perform PI Seek during
preset recall.
p The default setting for Auto PI Seek is off.
= For details, refer to Switching Auto PI seek
on page 134
Limiting stations to regional
programming
When AF is used to automatically retune fre-
quencies, the regional function limits the se-
lection to stations broadcasting regional
programmes.
% Touch
(or ).
Touching the key switches the status between
on and off.
p Regional programming and regional net-
works are organised differently depending
on the country (i.e., they may change ac-
cording to the time, country or broadcast
area).
p The preset number may disappear on the
display if the tuner tunes in a regional sta-
tion which differs from the originally set sta-
tion.
p The regional function can be turned on or
off independently for each FM band.
Using the AV Source (Built-in DVD Drive and Radio)
Engb
96
Chapter
10