Pioneer AVIC-HD3-II - Manual (Page 167)

If system errors frequently occur
If system errors frequently occur and the
power to the navigation system turns off, inap-
propriate content may have been recorded in
the memory or the hard disk drive. In such a
case, normal operations may be restored by
clearing the setting values stored in the hard
disk drive.
1 Start the engine.
After a few moments, the start-up screen
comes on for a few seconds.
2 Touch and hold MAP button while the
start-up screen is displayed.
“Clear memory screen” appears.
3 Touch [Reset].
4 Touch [Yes].
The setting values stored in the hard disk drive
return to the default or factory settings. After
that, the navigation splash screen appears.
Completely returning the
navigation system to the initial
state
To return the entire navigation system to the
default or factory settings, initialise the naviga-
tion system in the following order:
1 Press RESET button on the hardware.
2 Initialise the user data area on the hard disk
drive.
3 Clear the learned data in the sensor.
1 Turn the ignition switch off.
2 Press RESET button.
3 Start the engine.
After a few moments, the start-up screen
comes on for a few seconds.
4 Touch and hold MAP button while the
start-up screen is displayed.
“Clear memory screen” appears.
5 Touch [Clear user information from
hard disk].
p This reset operation clears all music data
recorded in the music library. Note that the
cleared data cannot be restored.
6 Touch [Yes].
The user area in the hard disk drive is initia-
lised. After that, the navigation system re-
starts.
7 Press MENU button and then touch
[Settings].
The setting menu appears.
8 Touch [Hardware] and then touch [3D
Calibration Status].
9 Touch [Learning Status] and then touch
[Reset All].
Adjusting the Response
Positions of the Touch Panels
(Touch Panel Calibration)
If you feel that the touch panel keys on the
screen deviate from the actual positions that
respond to your touch, adjust the response po-
sitions of the touch panel. There are two ad-
justment methods: 4-point adjustment, in
which you touch four corners of the screen;
and 16-point adjustment, in which you make
fine-adjustments on the entire screen.
Appendix
Engb
167
Appendix
Appendix