Pioneer AVIC-HD3-II - Manual (Page 28)

When the route guidance starts
Touching [ OK] in
“Route confirmation screen”
starts the route guidance on the displayed
route. Your navigation system gives you the fol-
lowing information with the timing adjusted to
the speed of your vehicle:
! Distance to the next turning point
! Direction of travel
! Road number of the motorway
! Arrival of waypoint (If waypoints are set)
! Arrival of your destination
p Touching
or allows you to turn the
voice guidance on or off.
p Touching
allows you to hear the in-
formation again.
p If you stop at a petrol station or a restaurant
during the route guidance, your navigation
system remembers your destination and
route Information. When you start the en-
gine and get back on the road, the route
guidance resumes.
p If you deviate from the route with guidance
set to [ Street List Mode] or [Mixed Mode]
and enter a street not recorded on the hard
disk drive, the screen changes to [
Map
Mode]. When you return to the route, the
screen returns to the original view and re-
sumes route guidance.
Basic items on the screen
This section describes only the basic items
that are displayed on the Map Mode screen.
= For more details about “Details of the map
screen
”, refer to How to Use the Map on page
33
2 3 1 4
1 Current location
2 Distance to the destination
3 Estimated time of arrival (default)
4 ON/OFF key for voice guidance
Cancelling the Route Guidance
If you no longer need to travel to your destina-
tion or if you want to change your destination,
follow the steps below to cancel the route gui-
dance.
1 Touch [Destination] in the navigation
menu, then touch [Cancel Route].
A message confirming whether to cancel the
current route appears.
2 Touch [Yes].
The current route is deleted, and a map of
your surroundings reappears.
On this screen, you can also select the follow-
ing items:
[
Skip]:
Skip the route to the selected waypoint, and re-
calculate the route. (The skipped waypoint will
not be deleted.)
[
No]:
Returns to the previous display without delet-
ing the route.
Modifying the Route
Calculation Conditions
You can modify the conditions for route calcu-
lation and recalculate the current route.
1 Touch [Destination] in the navigation
menu, and then touch [Route Overview].
p [Route Overview] is displayed only when
the route is set.
Basic Operation
Engb
28
Chapter
03