Pioneer SC-LX85 - Manual (Page 102)

En 102
14 Additional information
Symptoms Causes Remedies
Audio playback is
undesirably stopped or
disturbed. The audio file currently being
played back was not recorded
in a format playable on this
receiver. Check whether the audio file was recorded in a
format supported by this receiver.
Check whether the folder has been damaged or
corrupted.
Note that there are cases where even the audio files
listed as playable on this receiver cannot be played
back or displayed (page 53).
The LAN cable is currently
disconnected. Connect the LAN cable properly (page 30).
There is heavy traffic on the
network with the Internet being
accessed on the same network. Use 100BASE-TX to access the components on the
network.
When in the DMR mode,
depending on the external
controller being used, playback
may be interrupted when a
volume operation is performed
from the controller. In this case, adjust the volume from the receiver or
remote control.
There is a connection routed
through a wireless LAN on the
same network. There may be a shortage of bandwidth on the 2.4
GHz band used by the wireless LAN. Make wired
LAN connections not routed through a wireless
LAN.
Install away from any devices emitting electromag-
netic waves on the 2.4 GHz band (microwave ovens,
game consoles, etc.). If this does not solve the
problem, stop using other devices that emit electro-
magnetic waves.
Cannot access
Windows Media Player
11 or Windows Media
Player 12. In case of Windows Media Player
11: You are currently logged
onto the domain through
your PC with Windows XP or
Windows Vista installed.
In case of Windows Media Player
12: You are currently logged
onto the domain through your
PC with Windows 7 installed. Instead of logging onto the domain, log onto the
local machine (page 50).
Symptoms Causes Remedies
Playback does not start
while “Connecting...”
continues to be dis-
played. The component is currently
disconnected from this receiver
or the power supply. Check whether the component is properly con-
nected to this receiver or the power supply.
The PC or Internet
radio is not properly
operated. The corresponding IP address is
not properly set. Switch on the built-in DHCP server function of your
router, or set up the network manually according to
your network environment (page 89).
The IP address is being auto-
matically configured. The automatic configuration process takes time.
Please wait.
The audio files stored
on components on the
network, such as a PC,
cannot be played back. Windows Media Player 11 or
Windows Media Player 12 is not
currently installed on your PC. Install Windows Media Player 11 or Windows Media
Player 12 on your PC (page 49).
Audio files were recorded in
formats other than MP3, WAV
(LPCM only), MPEG-4 AAC,
FLAC, and WMA. Play back audio files recorded in MP3, WAV (LPCM
only), MPEG-4 AAC, FLAC, or WMA. Note that some
audio files recorded in these formats may not be
played back on this receiver.
Audio files recorded in MPEG-4
AAC or FLAC are being played
back on Windows Media Player
11 or Windows Media Player 12. Audio files recorded in MPEG-4 AAC or FLAC can-
not be played back on Windows Media Player 11 or
Windows Media Player 12. Try using another server.
Refer to the operation manual supplied with your
server.
The component connected
to the network is not properly
operated. Check whether the component is affected by spe-
cial circumstances or is in the sleep mode.
Try rebooting the component if necessary.
The component connected to
the network does not permit file
sharing. Try changing the settings for the component con-
nected to the network.
The folder stored on the compo-
nent connected to the network
has been deleted or damaged. Check the folder stored on the component con-
nected to the network.
Network connections could be
restricted due to the computer’s
network settings, security set-
tings, etc. Check the computer’s network settings, security
settings, etc.
Cannot access the
component connected
to the network. The component connected to
the network is not properly set. If the client is automatically authorized, you need to
enter the corresponding information again. Check
whether the connection status is set to “Do not
authorize”.
There are no playable audio files
on the component connected to
the network. Check the audio files stored on the component con-
nected to the network.