Pioneer SC-LX85 - Manual (Page 26)

En 26
03 Connecting your equipment
Connecting an HDD/DVD recorder, BD recorder and other video
sources
This receiver has two sets of audio/video inputs and outputs suitable for connecting analog or digi-
tal video devices, including HDD/DVD recorders and BD recorders.
When you set up the receiver you’ll need to tell the receiver which input you connected the recorder
to (see also The Input Setup menu on page 36).
RS-232C
ZONE 2 IN IN IN IN DVR/BDR OUT OUT ZONE 3 OUT TV/SAT VIDEO IN PHONO
GND SIGNAL
CD IN DVD
OUT 1
(CONTROL) OUT 2
PRE OUT MULTI CH IN
SUBWOOFER 1 2
COMPONENT VIDEO
Y P B P R
ASSIGNABLE
MONITOR OUT
ZONE2 OUT
(DVD) IN 1
(DVR/ BDR)
IN 2
(VIDEO) IN 3
FRONT
CENTER
SURROUND SURR BACK F HEIGHT F WIDE
L
R
CENTER FRONT SURROUND SURR BACK
( CD) ( DVD)
COAXIAL ASSIGNABLE
IN 1 IN 2 ( DVR/BDR) ( TV/SAT)
OPTICAL ASSIGNABLE
IN 1 IN 2 IN 3 OUT ( VIDEO)
(OUTPUT 5 V 0.1 A MAX)
ADAPTER PORT
CU-RF100
DC OUTPUT
for WIRELESS LAN (10/100) LAN (OUTPUT 5 V 0.6 A MAX)
FRONT CENTER SURROUND SURROUND BACK R L R L R L R L R L (Single)
(Single)
SPEAKERS
FRONT WIDE / B FRONT HEIGHT A A
AC IN
FM UNBAL 75 AM LOOP ANTENNA
(OUTPUT 5 V
150 mA MAX) CONTROL
IR
OUT
IN
OUT
IN 1
IN 2 2
1
12 V TRIGGER
(OUTPUT 12 V TOTAL 150 mA MAX)
VIDEO
AUDIO
MONITOR OUT
HDMI BD IN (VIDEO) IN 1 IN 2 IN 4 (DVD) IN 5 (DVR/BDR) IN 6
ASSIGNABLE 1 6
SUBWOOFER
DIGITAL OUT
COAXIAL OPTICAL ANALOG R L ANALOG R L
AUDIO OUT AUDIO IN VIDEO OUT
VIDEO VIDEO
VIDEO IN
HDD/DVD recorder, BD recorder, etc.
Select one
! In order to record, you must connect the analog audio cables (the digital connection is for playback
only) (page 62).
! If your HDD/DVD recorder, BD recorder, etc., is equipped with an HDMI output terminal, we
recommend connecting it to the receiver’s HDMI DVR/BDR IN terminal. When doing so, also
connect the receiver and TV by HDMI (see Connecting using HDMI on page 25).
Connecting your TV with no HDMI input
This diagram shows connections of a TV (with no HDMI input) and DVD player (or other playback
component) to the receiver.
! With these connections, the picture is not output to the TV even if the DVD player is connected with
an HDMI cable. Connect the receiver and TV using the same type of video cable as used to connect
the receiver and player.
RS-232C
ZONE 2 IN IN IN IN DVR/BDR OUT OUT ZONE 3 OUT TV/SAT VIDEO IN PHONO
GND SIGNAL
CD IN DVD
OUT 1
(CONTROL)
OUT 2
PRE OUT MULTI C
SUBWOOFER 1 2
COMPONENT VIDEO
Y P B P R
ASSIGNABLE
MONITOR OUT
ZONE2 OUT
(DVD) IN 1
(DVR/ BDR)
IN 2
(VIDEO) IN 3
FRONT
CENTER
SURROUND SURR BACK F HEIGHT F WIDE CENTER FRONT SURROUND SURR B
( CD) ( DVD)
COAXIAL ASSIGNABLE
IN 1 IN 2 ( DVR/BDR) ( TV/SAT)
OPTICAL ASSIGNABLE
IN 1 IN 2 IN 3 OUT ( VIDEO)
(OUTPUT 5 V
0.1 A MAX)
ADAPTER PORT
CU-RF100
DC OUTPUT
for WIRELESS LAN (10/100) LAN (OUTPUT 5 V 0.6 A MAX)
FRONT CENTER SURROUND R L R L R L R
(Single)
SPEAKERS
FRONT WIDE / B FRONT HEIGHT A
FM UNBAL 75 AM LOOP ANTENNA
(OUTPUT 5 V 150 mA MAX) CONTROL
IR
OUT
IN
OUT
IN 1
IN 2 2
1
12 V TRIGGER
(OUTPUT 12 V TOTAL 150 mA MAX)
VIDEO
AUDIO
MONITOR OUT
HDMI BD IN (VIDEO) IN 1 IN 2 IN 4 (DVD) IN 5 (DVR/BDR) IN 6
ASSIGNABLE 1 6
SUBWOOFER
ANALOG R
AUDIO OUT VIDEO IN
Y P B P R
COMPONENT VIDEO IN VIDEO OUT
VIDEO VIDEO Y P B P R
COMPONENT VIDEO OUT DIGITAL OUT
COAXIAL OPTICAL
HDMI OUT
L
TV
DVD player, etc.
Select one Select one Select one
! Connect using an HDMI cable to listen to HD audio on the receiver. Do not use an HDMI cable
to input video signals. Depending on the video component, it may not be possible to output
signals connected by HDMI and other methods simultaneously, and it may be necessary to make
output settings. Please refer to the operating instructions supplied with your component for more
information.
! If you want to listen to the sound of the TV over the receiver, connect the receiver and TV with audio
cables (page 25).
! If you use an optical digital audio cable, you’ll need to tell the receiver which digital input you
connected the player to (see The Input Setup menu on page 36).