Pioneer DEH-P700BT - Manual (Page 29)

Basic Operations
% Fast forward or reverse
Push and hold
MULTI-CONTROL left or right.
% Select a track
Push
MULTI-CONTROL left or right.
Note
Even though your audio player does not contain a
Bluetooth module, you can still control it from
this unit via Bluetooth wireless technology. To
control your audio player using this unit, connect
a product featuring Bluetooth wireless technol-
ogy (available on the market) to your audio player.
Introduction to advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
3 Turn MULTI-CONTROL to select the
function.
PLAY (play)
—STOP (stop)—PAUSE (pause)—
AUTO CONNECT (automatic connection set-
ting)
—DEVICE INFO (device information)
Function and operation
PAUSE is the same as that of the built-in CD
player.
Function name Operation
PAUSE
Refer to Pausing playback on page
22.
Notes
! You can also select the function by pressing
FUNCTION on the remote control.
! To return to the ordinary display, press
BAND/ESC.
! If a Bluetooth audio player is not connected to
this unit yet, AUTO CONNECT and
DEVICE INFO appear in the function menu
and other functions are not available.
! If a Bluetooth audio player is connected via
A2DP (Advanced Audio Distribution Profile),
only
AUTO CONNECT and DEVICE INFO ap-
pear in the function menu.
! If you do not operate functions within about
30 seconds, the display automatically returns
to the ordinary display.
Playing songs on a Bluetooth
audio player
1 Display the function menu.
Refer to Introduction to advanced operations
on this page.
2 Use MULTI-CONTROL to select PLAY in
the function menu.
3 Press MULTI-CONTROL to start play-
back.
Stopping playback
1 Display the function menu.
Refer to Introduction to advanced operations
on this page.
2 Use MULTI-CONTROL to select STOP in
the function menu.
3 Press MULTI-CONTROL to stop the play-
back.
Connecting to a Bluetooth
audio player automatically
! Initially, this function is set to on.
1 Display the function menu.
Refer to Introduction to advanced operations
on this page.
2 Use MULTI-CONTROL to select
AUTO CONNECT in the function menu.
Operating this unit
En
29
Section
02
Operating
this
unit