Pioneer DEH-P700BT - Manual (Page 34)

3 Push MULTI-CONTROL up or down to
select a pairing assignment.
1 (user phone 1)
—2 (user phone 2)—3 (user
phone 3)
# Push MULTI-CONTROL left or right to switch
the BD address and device name.
# If a phone is already assigned to the user
phone number, the new phone will overwrite the
old one.
# As you select each assignment, you can see
whether or not a phone is already paired. If the
assignment is empty,
NO DATA is displayed.
4 Press MULTI-CONTROL to pair the cur-
rently connected phone.
When pairing is completed,
COMPLETED is
displayed.
# If the pairing fails, REGISTER ERROR is dis-
played. In this case, return to step 1 and try
again.
Deleting a registered phone
1 Display the connection menu.
Refer to Introduction of connection and regis-
tration on page 31.
2 Use MULTI-CONTROL to select
DELETE PHONE.
3 Push MULTI-CONTROL up or down to
select a pairing assignment.
1 (user phone 1)
—2 (user phone 2)—3 (user
phone 3)
# Push MULTI-CONTROL left to display the BD
address of the selected device.
# If the assignment is empty, NO DATA is dis-
played and operation is not possible.
4 Push MULTI-CONTROL right to select
DELETE YES.
DELETE YES is displayed. Deleting phone is
now on standby.
5 Press MULTI-CONTROL to delete the
phone.
After the phone is deleted,
DELETED is dis-
played.
Making a phone call
Dial a number
The most basic way to make a call is to simply
dial the number.
Refer to Making a call by entering phone num-
ber on page 42 for detailed instructions.
Calling a number in the Phone Book
or the Call History
Refer to Calling a number in the phone book on
page 36 and Using the call history on the next
page for detailed instructions.
Preset number
Numbers that you dial frequently can be as-
signed to presets for quick recall.
Refer to Using preset numbers on page 37 for
how to assign a number to a preset.
Voice recognition
If your cellular phone features voice recogni-
tion technology, you can make a call by voice
commands.
! Operation varies depending on the type of
cellular phone. Refer to the instruction
manual that came with your cellular phone
for detailed instructions.
! This function can be operated only when
the connection is established with HFP
(Hands Free Profile).
1 Press BAND/ESC and hold until
VOICE DIAL appears in the display.
When
VOICE DIAL ON is displayed, voice re-
cognition function is ready.
# If your cellular phone does not feature voice
recognition function,
NO VOICE DIAL appears in
the display and operation is not possible.
2 Pronounce the name of your contact.
Operating this unit
En
34
Section
02